Leather care system

The leather care kit from HBC system maintains the original, natural non-shiny leather sheen

This unique leather care system provides your with an original, natural satin sheen leather surface without leaving a greasy film residue. Slipping around at the leather seat is history - the leather protection cream leaves a mat non-greasy finish. The leather care products are suitable for leather seats, dashboards, stearing wheels etc.

The professional high performance leather care kit contains:


HBC INK REMOVER, STICK
Part no. 00.939, 20g

HBC Ink Remover eliminates stains and pen marks, ink and lipstick from pigmented leather. Do not use on nubuck, suede or aniline leather.





Instructions for use:

1. Remove the screw cap and push up the tip about 4 mm out of the tube, unscrewing it. 
2. Pre-test on a concealed area. 
3. Pass the HBC Ink Remover stick repeatedly over the point to be cleaned, pressing gently. 
4. Let the product work on the stain for about 30 seconds. 
5. Wipe off HBC Ink Remover with a soft dry cloth. 
6. Clean with Leather Cleaner.
7. Apply HBC Leather Guard, rubbing the leather gently with circular movements, then let it dry.

HBC LEATHER CLEANER, STRONG
Part no. 00.942, 250ml.

HBC Leather Cleaner, strong contains a highly effective detergent for cleaning pigmented leather upholstery like car, motorcycle, boat, airplane and sofa seats. It can also be used on other resistant leather articles like shoes and handbags. It is not suitable for aniline leathers, nubuck or suede. If you have a delicate skin or if you use frequently HBC Leather Cleaner, strong, please wear latex gloves while using the product.

Instructions for use:

1. Shake the bottle well before using.
2. Pre-test the colorfastness on a hidden area.
3. Put HBC Leather Cleaner, strong onto a soft sponge and produce foam by squeezing it repeatedly.
4. Clean the area without rubbing.
5. Wipe the excess foam and the soiling away with a soft white cotton cloth.
6. Dry with a dry cloth and let dry fully.

HBC LEATHER GUARD (LEATHER PROTECTION CREAM) Part no. 00.941, 250ml.

HBC Leather Guard is a water based protection cream for all leather types, except nubuck and suede. HBC Leather Guard protects against oil, water and alcohol based stains as well as everyday dirt and grime. It will also keep your leather lovely and soft, and when used regularly prevents pigmented leather from cracking.

We recommend your leather is cleaned and re-protected at least every six months. Aniline leather placed in rooms subject to heavier use may need cleaning more regularly and more thoroughly.

Instructions for use:

1. Shake the bottle well before use.
2. Pre-test on a concealed area.
3. Put a small amount of HBC Leather Guard onto a soft, clean cloth and apply to the surface of the leather evenly. Repeat on areas subject to heavy use.
4. Leave about 30 minutes to dry.
5. Buff the leather lightly with a clean soft cloth.

HBC STAIN REMOVER
Part no. 00.942, 250ml.

HBC Stain remover removes resistant stains from leather and PVC. Do not use on aniline, nubuck or suede. Use this product with caution.



 Instructions for use:

1. Apply a little HBC Stain remover on a clean cloth.
2. Test the colour resistance of the leather on a hidden spot.
3. Rub lightly on the leather to see if there is no colour transfer onto the cloth.
4. If this test is OK, rub lightly with the cloth over the stained area.
5. If needed, treat the stained area once more, checking regularly that no colour is transferred onto the cloth.
6. Clean the treated area with HBC Leather Cleaner.
7. Let dry and apply HBC Leather Guard

The Leather Care System can be ordered here